Onboard carbon capture is moving from conference slides to engine rooms. The IMO has a work plan, approved at MEPC 83, to develop a full regulatory framework for onboard carbon capture and storage by 2028 — covering testing, survey and certification guidelines, the classification of captured CO₂ (is it cargo, waste, or something else?), and the emissions-credit accounting that will let captured CO₂ count against a ship’s GHG Fuel Intensity. FuelEU Maritime already rewards onboard CCS with a consumption multiplier. Several shipowners have committed systems; several more are studying them.
What the vendor presentations rarely convey is that an OCCS system is not a scrubber. A scrubber takes a pollutant and disposes of it overboard immediately. An OCCS takes a gas stream, extracts a component, and leaves you holding a product — CO₂ at pressure and purity — that has to be stored, carried, discharged ashore, and accounted for. That makes it a whole-ship engineering problem, and it is the kind of problem mechanical and systems engineering exists to solve.
The Four Integration Realities
1. The absorption system wants your engine’s heat
Most near-term marine OCCS designs use amine-based absorption: exhaust passes through a solvent that captures CO₂, and a regenerator (reboiler) strips the CO₂ back out of the solvent for compression. The reboiler is a heat consumer — typically low-pressure steam or hot water in the 100–150°C range, in quantities that can rival a ship’s existing heat balance. On vessels with abundant waste heat (large two-stroke installations with scavenge air and jacket water to spare), the integration is natural. On others, the OCCS needs dedicated heat: fired boilers, or preheating skids that condition the solvent before startup and maintain temperature at standby. We design exactly these systems — our OCCS solvent preheating skid work is born from this problem.
2. The captured CO₂ is cargo, and it takes real space
Capturing 30% of a Handymax’s emissions produces tonnes of CO₂ per day, and it must be stored onboard as liquid — which means low temperature, moderate pressure, insulated tanks, and cryogenic-adjacent engineering: tank sizing against voyage length, boil-off management, discharge connections for port reception of the captured stream. Owners must decide early: liquid CO₂ tanks in a dedicated space, and the associated structural work, piping, insulation, and safety systems. On many merchant designs, finding that volume without sacrificing cargo is the single hardest constraint.
3. The exhaust path becomes a processing plant
An OCCS sits between the engine and the atmosphere: quench and pre-treatment of the exhaust gas (cooling it, removing particulates and SO₂ that would poison the solvent), the absorber column itself, then a treated-gas stream that still must satisfy every other exhaust rule — including, notably, that any CO₂ slip or amine emissions from the system itself will eventually fall under the very environmental rules the system is helping satisfy. Fans, ducting, dampers, and the control philosophy that keeps engine backpressure stable through it all.
4. The energy budget pays for everything
Capture costs energy — heat for regeneration, power for compression. That energy is either additional fuel (which increases the CO₂ flow to capture) or electricity that must be generated aboard. The honest engineering question is the net capture rate after the system’s own appetite, and it moves the vessel’s CII, ETS, and GFI numbers at the same time. A feasibility study that ignores the auxiliary load is marketing, not engineering.
What to Demand from Any OCCS Project
- A heat and mass balance for your vessel, not a generic one
- Space and weight allocation drawings at concept stage, against the actual general arrangement
- Net capture economics — capture rate minus the system’s own fuel and power consumption, priced against ETS, FuelEU, and future GFI deficit costs
- Discharge chain clarity — which ports on your route can actually receive liquid CO₂, with what certification trail
- Regulatory horizon mapping — how the IMO’s 2028 framework requirements will apply to the design you’re being sold today
How We Help
Ingeniat is an equipment and systems engineering company. We design the balance of plant that OCCS vendors assume exists: solvent preheating and conditioning skids, heat integration with existing engine systems, tank and piping concepts for captured CO₂, and the supporting structure and ventilation work. We also run the feasibility discipline — energy balance, space allocation, net capture economics — that tells an owner whether the system makes sense on their hull before capital is committed.
Related Reading
- Heating Skid for OCCS Solvent Preheating
- FuelEU Maritime Compliance Services
- GFI vs CII vs FuelEU vs EU ETS
→ See our OCCS solvent preheating skid
OCCS will be decided by whole-ship engineering, not by capture chemistry alone. Contact us to discuss the balance-of-plant engineering for your onboard carbon capture project.
