On a tanker, the auxiliary boiler is the heart of the cargo operation: tank heating, cargo pumping steam, IG plant, tank cleaning. On other vessel types it is a quieter servant — domestic hot water, accommodation heating, fuel service heating, and the standing heat losses of a system built around it. And on a remarkable share of the fleet, it fires around the clock, burning fuel to deliver heat that is barely used, through a system that leaks it at every joint.
The economics are simple and brutal: a medium auxiliary boiler at sea burns fuel with no revenue cargo attached. Unlike the main engine, its consumption appears in the auxiliary fuel figures, unbudgeted, unmeasured in most cases, and unnoticed — a continuous smudge across the fleet’s fuel ledger.
Where the Heat Actually Goes
- Standing losses — an insulated steam/hot water system loses heat to the atmosphere at a rate set by its insulation condition and its pipe runs; every valve, uninsulated flange, and damaged lagging section multiplies it (the classic thermal-imaging survey finds double-digit percentage losses on systems never surveyed)
- Standing demand — accommodation heating and hot water traces, fuel tank heating setpoints, tracing on lines that lead nowhere in particular, all set by habit rather than duty
- The condensate problem — systems without condensate return (many older tanker steam arrangements) throw away heated water and treat it as normal; every tonne of feed water is a tonne of fuel used twice (once burned, once made)
- Control philosophy — boilers controlled on pressure/temperature with no relation to the actual demand behind them; firing against a setpoint nobody has reviewed in a decade
The Fuel-Meter Blindness
Most vessels have no separate measurement of boiler fuel, or a fuel figure that mixes with auxiliary consumption. This single blind spot means the efficiency of one of the ship’s largest constant consumers is invisible at the reporting level — invisible in CII, invisible in ETS modelling, invisible in the SEEMP measures register. It is the classic case of the energy audit’s first lesson: what isn’t measured isn’t managed, and the boiler is the least measured major consumer on board.
The Fix Sequence
- Measure it — separate boiler fuel metering (or tank-based accounting that makes it visible); the first month of data routinely shocks
- Survey the losses — thermal survey of the system: lagging condition, leak losses, valve and flange losses, tank tracing duty
- Fix the control duty — demand-based firing, reviewed setpoints, dead-band discipline, and time-based duty for intermittent loads (tank heating schedules against actual cargo requirements)
- Recover what you can — waste heat from main engine jacket and exhaust substituting for boiler duty at sea (the economics of WHR-boiler substitution are often the best on the ship — see our waste heat recovery work)
- Condensate discipline — return what can be returned, and treat the losses as the fuel account they are
How We Help
Ingeniat is a heating and process systems engineering company — steam and thermal oil systems, heat recovery skids, and the heat balance engineering around them are our core practice. We run boiler and heat system audits (consumption visibility, loss surveys, duty analysis) and design the fixes — control changes, insulation programs, condensate return, and heat recovery integration — with the fuel numbers attached before the work starts.
Related Reading
- Waste Heat Recovery for Mid-Size Vessels: the retrofit numbers
- Generators Running at Their Worst Efficiency
- Compressed Air: The Invisible Fuel Consumer
→ See our waste heat recovery units
A boiler firing against nobody is the quietest fuel thief on board. Contact us for a heat system audit.
