DNV Standard 2.7-3, currently designated DNV-ST-E273 – Portable Offshore Units, establishes the requirements for the design, manufacturing, testing and certification of portable equipment intended for transportation and handling in offshore environments. The current edition dates from April 2016 and was amended in October 2021.
It sits within DNV’s framework for offshore transport equipment alongside two sister standards: DNV-ST-E271 (2.7-1) covers conventional offshore containers, and DNV-ST-E272 (2.7-2) covers service modules. DNV-ST-E273 fills the gap for everything else that must be moved offshore but is not a container or a service module.
What is DNV-ST-E273?
The standard was developed to address equipment that does not meet the definition or conventional configuration of an offshore container under DNV 2.7-1. Typical examples include:
- Transport skids
- Equipment frames
- Specialist transport units
- Other non-container-shaped structures designed for offshore transportation
The primary objective of DNV 2.7-3 is to ensure that such units can be safely transported and lifted offshore — including subsea operations where applicable — while minimising risks to personnel, the environment and offshore installations. The standard covers the unit’s structural design, manufacturing, testing and certification, taking into account the particular configuration, intended use and operational limitations of the equipment.
How does DNV 2.7-3 differ from DNV 2.7-1?
DNV 2.7-3 and DNV 2.7-1 are complementary standards within DNV’s offshore transport equipment certification framework, but they address different types of equipment.
DNV 2.7-1 (DNV-ST-E271 – Offshore Containers) provides requirements for conventional offshore containers: structural design, lifting arrangements, manufacturing, testing, marking and periodic inspection. It is intended for equipment with a defined container-type structure and external framework. For the background on the container standard itself, see our overview of the DNVGL-ST-E271 2017 update.
DNV 2.7-3 (DNV-ST-E273 – Portable Offshore Units) addresses portable offshore equipment that falls outside the conventional container definition. It provides a more flexible, risk-based approach to structural design and certification.
One point bears emphasising: DNV 2.7-3 is not an alternative or simplified route to certification for equipment that falls within the scope of DNV 2.7-1. If a unit meets the definition of an offshore container, it should be certified according to DNV 2.7-1. Both standards ultimately pursue the same objective — safe transportation and handling of equipment in offshore environments — but the route each one prescribes depends on what is being certified.
What about ISO 10855?
The main international reference for this equipment class is the ISO 10855 series, which addresses offshore containers and their associated lifting sets:
- ISO 10855-1: Design, manufacture and marking of offshore containers
- ISO 10855-2: Design, manufacture and marking of lifting sets
- ISO 10855-3: Periodic inspection, examination and testing of offshore containers and lifting sets
ISO 10855 is closely related to DNV 2.7-1: both provide an internationally recognised framework for ensuring that containers withstand the loads and conditions associated with offshore transportation.
An important distinction, however: ISO 10855 is not a direct equivalent of DNV 2.7-3. Its scope is limited to offshore containers and their lifting sets, not the wider range of portable offshore units covered by DNV 2.7-3. There is no direct one-to-one ISO counterpart to DNV 2.7-3; its requirements sit within the broader framework of applicable international standards, engineering practice and offshore transportation requirements.
Who needs DNV-ST-E273 certification?
DNV-ST-E273 applies to portable offshore units that are designed for transport and handling in offshore environments but do not qualify as containers or service modules. In practice this means:
- Owners and operators of skids, frames and specialist units that must be lifted on and off platforms or installed subsea
- Manufacturers building portable equipment to order who need a recognised certification basis for design and production
- Inspection and classification bodies requiring a defined technical standard against which the unit can be assessed
For a deeper look at the certification route itself, see our guide to DNV 2.7-3 certification for portable offshore units.
What Ingeniat does for DNV-ST-E273 projects
Ingeniat provides engineering support for portable offshore unit projects certified to DNV-ST-E273:
- Design review of the unit against the standard’s structural requirements
- Structural calculations and digital calculation reports in place of spreadsheets
- Preparation of certification documentation for submission to the classification or inspection body
- Support with lifting arrangements and load cases specific to the unit’s configuration
Choosing the right standard
Which standard applies depends on the equipment’s design, configuration, intended function and classification:
| Standard | Covers | Typical examples |
|---|---|---|
| DNV-ST-E271 (2.7-1) | Offshore containers | 20ft/40ft offshore containers, tank containers, bulk containers |
| DNV-ST-E272 (2.7-2) | Service modules | Pressurised service modules, accommodation and utility modules |
| DNV-ST-E273 (2.7-3) | Other portable offshore units | Transport skids, equipment frames, specialist transport units |
When in doubt about which standard applies to a particular unit, the configuration of the structure — not its intended use alone — is what determines the correct route.
Ingeniat supports POU projects from first design review through to certificate. Contact us to discuss your unit.
