Ballast water treatment systems

Designed to simplify and minimize
installation times.

Integrating different treatment technologies and equipment suppliers.

Let us know how we can help

Whether you are responsible for the retrofit and installation of the ballast water treatment package within the engine room, or on the main deck, we can assist with the supply of design and engineering packages based upon available documentation and onboard survey results, including:

  • System layout / arrangement within purpose built deckhouse, or within engine room.
  • Structural arrangement drawings (foundations, pipe supports, etc).
  • Architectural drawings (insulation and fire rating).
  • Installations (ventilation, fire detection, etc).
  • Schematic and P&IDs.
  • Piping arrangement and isometric drawings.
  • Material Take Off lists.
  • Electrical block drawings.
  • Installations notes and drydock specification.
Besides specific deliverables, we can also provide general consultation and technical assistance services, as described below. Please keep reading and get in contact, we will be thrilled to hear from you and provide you with a complimentary consultation at no cost to you.

Get your free consultation

The services we offer

We design and engineer modular packages integrating different equipment and disciplines into functionally independent units, and can deliver an integrated scope of supply comprising basic design, detail engineering, procurement, fabrication, testing and pre-commissioning. 
We also provide project management services to control all the different stages described above.
By providing an integrated scope of supply and acting as a single source in your supply chain we take over the responsibility of liaising between different contractors on your behalf, minimizing the associated risks and impact to scheduling and budgetary constraints.
Fully operational packages comprising treatment equipment from well known suppliers.
We have experience in the development of projects intended for operation in harsh environmental conditions (low temperature, strong winds, etc), hazardous areas (ATEX Zones 1 and 2), and developed under strict regulations and standards for operation and certification (DNV Class or Offshore Standards, and NORSOK, for packages to be installed onboard MODUs, as well as ocean-going vessels under Class requirements).
In short, our value proposition is to provide an integrated package and scope of supply which results in mitigated friction between project stages and minimized interactions outside of our scope of supply, with strong emphasis in control, measurement, and reporting of progress and deviations, simplifying your supervisory effort.
Besides integrated scopes of supply, we can identically undertake more limited scopes of supply, such as the delivery of engineering packages suitable for fabrication by others, or traditional consultancy and specialist services.

The challenges and pain points we specifically address

Including retrofit and integration with existing ship systems and spaces.
– Inefficient communication which may hinder or slow project development. 
To mitigate this potential issue we offer local presence at your premises during the kick-off and early project stages, ensuring that the basic design requirements and preferences are well understood and accounted for. 
We also offer a wide range of communication channels to ensure constant presence and availability so as to remain in close contact with your team, as well as access to secure data repositories to push project updates on a regular basis.

As an option, we offer project management services during the fabrication and testing stage.

By being responsible for the design and engineering package we can ensure that the manufacturer is well aware of project requirements and scopes, simplifying the quotation process, and ensuring proper communication and supervision, back and forth, during the fabrication and testing stage.

– Aggressive project timelines, scope variations and budget constraints.
We are acutely aware of the importance of upholding the contractual commitments, and the impact any deviations may have on your overall project scope. We offer weekly project updates detailing progress and, where appropriate, highlighting any deviations which have been detected, their causes, and our suggestions to mitigate their consequences. If we might fail to appropriately detect any measurable deviation, or act upon any detected deviations, we will voluntarily undertake to meet the obligations laid out in our professional guarantee as described below, in addition to whatever contractual terms might kick in. 
– Overcoming a wide range of hurdles, pronto.
Whether a drawing needs to be promptly amended to accommodate an urgent request during plan approval, or a parcel is stuck in customs half way across the world due to incorrect or missing paperwork, or a new batch of PTFE coated bolting material is needed urgently at the installation site, we are here to help, seven days a week.
– Embracing new technology.
We constantly review and evaluate new software tools and technologies available in the market so as to be able to provide more complex scopes, be more flexible, and stay relevant.
As an example, we have recently deployed a set of tools enabling us to offer a virtual reality environment for design review and remote collaboration with clients and stakeholders, also acting as foundation for digital twin prototyping.
We can also deliver fully tested and configured environments for finite element modelling and analysis, based upon recognized open source packages, including benchmarks.

De-risking, performance measuring, and our professional guarantee

Our engineering deliverables and overall performance are covered by a comprehensive insurance policy that offers economic safeguard against a wide range of risks and uncertainties. Specific arrangements can be made on a project basis to extend the coverage, and policies are available upon request.
We guarantee that our practicing engineers will address your consultation to your satisfaction. They will also promptly return your emails, phone calls, or conference calls, within the same business hour, and fully addressing your concern or query. Where the query might require further action or consultation, or justifiable additional effort, clear estimates will be provided, and acted upon.
If we do not live up to any of these promises, or if you might feel that our performance has fallen short, we insist that you tell us, and we will make it right by scrambling to address any shortcomings, and crediting your account double the billable amount of the original consultation.


Getting in contact and your free consultation

We are interested in building a relationship with you. In order for you to have the opportunity of evaluating our response and performance, we are lowering the barrier to entry by offering a free consultation, no obligations or strings attached, where you can interact with our consulting engineers for up to 15 hours of billable work, which will be credited to your account at no cost to you. 
Just fill the form available on this page, and our team will be happy to get in contact with you within the next 24 hours.
Terms and conditions are simple:
No obligations on your part, implicit or otherwise. Fair use applies and we reserve the right to disengage at any time in case of abuse or misuse of this promotion, confirmed or otherwise. This offer expires on December 31st, 2022.
Tailored and purpose-built to address specific operational requirements.

Contact Us

For a complimentary consultation, or to request a case study and additional information,  call +34 644358624 or +44 7360 606849  or complete this form.

We look forward to hearing from you.

About Ingeniat

Ingeniat provides engineering services, consulting services, project management services, as well as supplies turn key, functionally independent, engineered modular packages. With over sixteen years of experience, Ingeniat is supplying services in diverse sectors, with special interest in the North Sea oil & gas sector.
Please direct queries to Manuel Amorim, T +34 663700398,