Engineering and Project Management
 

When Blends Go Wrong: VLSFO Compatibility and Stability

Very Low Sulfur Fuel Oil was supposed to be boring: a 0.50% sulfur product that behaves like the fuel everyone knew. Instead, VLSFO became the most diverse fuel category ever sold — hundreds of refinery blend recipes, each with its own density, viscosity, pour point, stability profile, and blending behavior. Two stems that look identical on a bunker delivery note can be chemically incompatible in the same tank.

The result is a failure mode the industry learned about in real time: blended fuels that precipitate asphaltenes, form sludge, block filters and purifiers, coat service tanks, and leave a vessel limping between ports with a fuel system full of tar.

The Chemistry in One Paragraph

Residual fuels are colloids: asphaltenes held in suspension by resins and aromatic oils. Blending changes the solvent balance — if a blend’s aromaticity drops too far, the asphaltenes flocculate and precipitate. The industry calls it incompatibility; your purifier calls it sludge. Because blends are made from refinery leftovers that change with every crude slate, the problem is not a bad batch from a bad supplier — it is a structural property of a blended-fuel world. And with biofuel fractions entering the same tanks, the compatibility question now spans three ingredients instead of one.

Where the Damage Shows Up

  • The tank tops and bottoms — precipitated sludge accumulates in storage tanks, waiting for weather or a top-off to stir it into the suction
  • The purifiers — first to trip, first to be blamed; sludge loads separators past their design duty and the maintenance spiral begins
  • The filters and separators downstream — differential pressure alarms become routine, and crews learn to open bypasses they should never touch
  • The service tank — the quiet victim: a coating of sludge that contaminates every subsequent stem and takes the tank out of service to clean
  • The engine, last — injector fouling, combustion deposits, and in the bad cases, the fuel starvation that stops a main engine at sea

The Discipline That Prevents It

  1. ROB compatibility management — never commingle a new stem with significant ROB without a compatibility test (spot tests exist; labs confirm). The most expensive incompatibility incidents are almost always “new stem met old stem in the settling tank.”
  2. Stability testing on purchase — the residual fuel stability parameters and the supplier’s blend recipe history matter; a supplier whose product has been stable for your fleet is an asset worth paying for
  3. Segregation where possible — dedicated tanks for high-risk stems; the trade-off between tank flexibility and fuel safety is a real decision, not an accident
  4. Purifier-first fuel paths — fuel through the purifier at every opportunity, with throughput sized to the duty
  5. Watch the early signals — rising purifier sludge, filter DP trends, dark and sticky tank bottoms found at sounding: these are the warnings three weeks before the engine notices

How We Help

Ingeniat designs fuel handling and separation systems — purifier configurations, filtration trains, tank management procedures — and we review fuel programs as engineering: which fuels your machinery can digest, how to handle commingling risk, and what the tank and purifier arrangements should be for the fuel market you actually buy in.

Related Reading

→ See our filtration & separation systems


Blended fuel is here to stay; blend disasters are optional. Contact us for a fuel compatibility and handling review.