Waste heat recovery has an image problem: it’s associated with the big two-stroke plants of container ships and VLCCs, where exhaust gas boilers and steam turbines harvest megawatts from the main engine. For mid-size vessels — handysize bulkers, product tankers, feeder containerships, offshore support tonnage — the conventional wisdom says WHR doesn’t pencil out, and the analysis never gets done.
The conventional wisdom is out of date. It was formed when fuel was cheap, when CII didn’t exist, and when the only WHR product on the market was the exhaust gas boiler. Today, mid-size vessels face fuel prices, carbon intensity ratings, and emissions costs that change the arithmetic — and the low-grade heat sources they have in abundance (jacket water, scavenge air, auxiliary exhaust) are harvestable with the right equipment.
The Heat Mid-Size Ships Throw Away
A mid-size diesel plant rejects roughly half its fuel energy as heat. Three flows dominate:
- Jacket water cooling — a steady 80–90°C stream at power levels that often exceed the ship’s service heat demand
- Scavenge air cooling — charge air heat, particularly on two-strokes, at useful temperature and flow
- Exhaust gas — the highest-grade source, at temperatures that can raise steam or thermal oil even from modest engines
Against this supply sits the ship’s heat demand: domestic hot water, accommodation heating and HVAC, tank heating on tankers, fuel service heating, purifier heating — demands that are currently met by boiler steam, electric heating, or main-engine-derived sources at poor efficiency.
The Four Ways to Harvest It
1. Exhaust gas boilers and economizers
The classic move: recover exhaust heat into steam or hot water, displacing the auxiliary boiler. On mid-size plants the economics hinge on the firing hours of the oil-fired boiler — the more the boiler runs at sea, the better the case.
2. Low-grade heat to service demand
Simple, robust, and underrated: route jacket-water and scavenge-air heat through heat exchangers to the services that currently pay for energy — hot water systems, calorifiers, space heating via the existing distribution. This is plumbing and heat exchanger engineering, not exotic equipment, and it displaces auxiliary boiler and electrical load directly.
3. Organic Rankine Cycle and small power recovery
Where the heat grade allows, small ORC units convert heat streams into electricity — quiet, mechanical-electric machines with zero fuel consumption, sized in the tens-to-hundreds of kW range that matches mid-size auxiliary loads. The economics are a function of running hours and displaced generator fuel.
4. Heat-driven utilities
Absorption refrigeration for provision rooms and HVAC, and heat-driven freshwater generation (our jacket water-driven desalination system is exactly this category): heat that would have been dumped overboard now produces distilled water, displacing the energy cost of conventional evaporators.
The Retrofit Numbers
This is where the analysis nobody runs actually pays. A credible WHR feasibility study for a mid-size vessel answers:
- What is the heat supply curve? — by source, temperature, flow, and engine load, over the actual trading profile
- What is the heat demand curve? — by service, over the same profile, including seasonality
- What does displaced energy cost? — boiler fuel, generator fuel, evaporator energy, priced at the fleet’s actual fuel costs
- What does the retrofit cost? — equipment, piping, space and weight claims in the real engine room, installation and class approval
- What are the secondary effects? — fuel savings feed straight into CII and ETS/GFI numbers; heat recovery often improves auxiliary loading and engine room temperatures as side benefits
Done honestly, the study either returns a payback period — frequently in the three-to-six-year range for tankers and offshore tonnage with steady steaming profiles — or a documented “no,” which is also valuable before someone spends the money anyway.
How We Help
Ingeniat is a mechanical engineering and equipment systems design company — heat exchangers, heating skids, process systems, and energy recovery equipment are our native work, including our jacket water-driven desalination system and heating skid designs. We run the feasibility study end-to-end: heat audit, demand mapping, equipment selection, retrofit design, and the payback case against your fleet’s fuel costs and carbon metrics.
Related Reading
- Waste Heat Recovery Units
- Jacket Water-Driven Seawater Desalination
- ORC Onboard: Low-Grade Heat to Kilowatts
→ See our waste heat recovery units
Mid-size vessels throw away half their fuel energy as heat — the question is what it costs to capture some of it. Contact us for a waste heat recovery feasibility study.
